Commercial, industrial & municipal recycling across North Carolina, Virginia and West VirginiaCall or text (540) 418-3466  ·  info@nt-recycling.com

Resources

Plastic identification: resin codes and polymer types

Updated · NT Recycling

Plastics are recycled by polymer type, and each type has its own value and market. Knowing what you have helps you get better pricing and keeps loads clean. Most plastic parts and packaging are marked with a resin code: a number inside a triangle of arrows, often with letters below it.

Resin identification codes

  • #1 PET (polyethylene terephthalate). Water and soda bottles, clear food containers, some strapping.
  • #2 HDPE (high-density polyethylene). Milk jugs, detergent bottles, drums, crates, and pipe.
  • #3 PVC (polyvinyl chloride). Pipe, siding, window frames, and some wire insulation.
  • #4 LDPE (low-density polyethylene). Stretch film, shrink wrap, poly bags, and liners.
  • #5 PP (polypropylene). Totes, bins, caps, automotive parts, nursery pots, and supersacks.
  • #6 PS (polystyrene). Foam packaging, some trays, and rigid clear cases.
  • #7 Other. Everything else, including ABS, polycarbonate (PC), nylon, acrylic, and mixed plastics.

Common industrial plastics marked #7

  • ABS. Electronics housings, appliance parts, and automotive trim. Hard, glossy, and rigid.
  • PC (polycarbonate). Clear guards, lenses, water jugs, and safety glazing. Very tough and clear.
  • Nylon (PA). Gears, bushings, zip ties, and fibers. Tough and slightly waxy.
  • Acrylic (PMMA). Signs, displays, and sneeze guards. Clear but more brittle than polycarbonate.

How to tell them apart without a code

  • Look for a stamp. Molded parts often have the code or letters, like >PP< or >ABS<, on the back or inside.
  • Check the paperwork. Spec sheets, purchase orders, and part drawings usually name the material.
  • Try the float test. In plain water, PE and PP usually float, while PET, PVC, ABS, and PC usually sink.
  • Feel and flex it. Film that stretches before it tears is usually LDPE. Stiff parts that snap are often PS or acrylic.
  • Text us a photo. We can usually tell from a picture and a description of where it came from.

Please don’t do a burn test. The fumes from burning plastic are harmful.

Keeping plastics recyclable

  • Keep types separate when you can. A clean load of one polymer is worth more than a mixed one.
  • Keep it clean and dry. Remove food, dirt, labels, and tape where practical.
  • Keep film loose or baled, not mixed with other trash.

Common questions

Do you take all seven types?

It depends on the material and volume. See what we take, or text us a photo and we’ll let you know.

Does a recycling symbol mean it’s recyclable?

Not always. The code tells you what the plastic is, not whether a recycler takes it. Ask us about your material.

Related: What we take · All guides